Porsche 968 - Headlight Operation and Adjustment; High and Dipped Beam Control; Headlight Beam Adjustment System

High and Dll•lted Beam, Headlight
Flashor
1111 • hl11 o llllolldiiiP 111 tile in s trument panel lights
liP w l11 • 11 1111111 tH \ 1111 is on or the headligh'ts are
lld •. lii•d
WIH'II tile he adli g ht s are switched on:
Dipp ed be am
lligh beam
Fla sh headlights
stalk in centre position
push stalk forward
pull stalk towards
steering wheel
{also functions if
vehicle lights are off)
Headlight Beam Adjustment
The headlight beam adjustment system can be
used to adapt the headlight range to the load
condition of the vehicle . This ensures maximum
road illumination without dazzling other road
users .
For the basic headlight beam setting the adjus-
ter must be set to the click - stopped "0" position.
When your Por sc he is mo re h ea v1l y l oaded, til e
beam s etting must be c orr ec t ed as sh own 111 th e
table. By turning the knurled wh ee l, th e bea m IS
raised or lowered .
Check the correction by observing the dipp ed-
beam cut-off {e . g. on the back of the vehicl e in
front) .
I
~D Load condition
"'
0 = 1 or 2 occupants without luggage
l = 3 or 4 occupants with / without luggage
2 = l or 2 occupants with luggage
968 CS without rear seats
0 = l or 2 occupants without luggage
l = 2 occupants with luggage
2 = l occupant with luggage
35