Porsche 968 - Tyre Replacement and Winter Tyres; Tyre Replacement Procedures; Winter Tyre Usage Guidelines

Ro1•lndnac Tym
llutr r• 1•, 1111 hl rrdll tl{ ~ l . md a rd c on c ernin g per -
lllill
t• d lup •, ppr•d lor Ill lyr es a bove 240 km/h .
I
11 1 llrl '• '"" '• Oil and b ec au se of noise emission
'' 'H III ll llllll '•, cc rl di n makes and types of tyres
"' ' hutdll lfl; for so me countries these makes
.r11d typ es are ex pli ci tly indicated in the vehicle
rl' H t ~ lr a li o n .
Pl ease as k your Official Porsche Centre about
th e lat es t authorization situation before fitting
new tyres to your Porsche .
Therefore, use only makes and types of tyre
tested by Porsche .
Only tyres from a single manufacturer and of a
single type should be combined .
When replacing tyres, always be sure to replace
the valves.
During the initial break-in period, new tyres do
not have their full grip .
Therefore, you should only drive at moderate
speeds for the first 100 - 200 km .
When fitting new tyres to only one axle, a
marked difference may be noticeable in the pre -
viously experienced driving behaviour due to the
different tread depth from one axle to the other .
This is especially true when fitting new tyres to
th e rear axle. With increasing tyre mileage, how -
ever, this effect will continuously diminish.
Please adjust your driving accordingly.
Have tyres fitted by a specialist.
Winter lyres
Do not exceed the max i mum speed limit (e.g .
160 km/h / 100 mph for M + S (Q) radial tyres,
or 190 km/h / 120 mph for M + S (T) radial
tyres or 210 km/h I 130 mph for M + S (H)
radial tyres) .
The corresponding designation is marked on the
tyre sidewall .
An appropriate sticker must be placed in the
driver's field of vision.
Winter tyres lose their effectiveness if the tread
depth goes below 4 mm .
85