Porsche 968 - Tail Light Bulb Replacement

Side Indicators
l. Slide light unit toward the rear of the vehicle
and remove .
2. Pull the rubber sleeve and socket from the
housing.
3. Remove the defective bulb and fit a replace-
ment.
98
4. Reinsert the bulb socket, push the rubber
sleeve into place and push the housing into
its mounting in the wing until it snaps into
place .
5.
Check operation of the bulbs .
Fog Lights, Auxiliary Headlights
1. Loosen screw of direction indicator and pull
out light forwards .
2. Loosen Phillips screw (arrow) of light unit and
remove light unit.
3. Loosen Phillips screw of plastic cover and
remove cover.
4. Squeeze retaining bracket of defective bulb
together (arrows) and pivot to one side .
5.
Replace bulb and install light unit. Check for
correct operation.