PORT SHIELD - Bluetooth Management; Setting Your Passcode

Generate Passcode
anent Timed One-Time Erase
Custom Recurri
Permanent
Start Time
2020-03-06 09:00
End Time
2020-03-06 09:00
TTLock
T1A
Touch to UnLock. Long Press to Lock
Passcodes
IC Cards
Authorized Admin
Records
Settings
Generate Passcode
Send eKey eKeys
Passcodes can be used to unlock the door. Create a passcode by clicking
"Generate Passcode" on the app. The system will create a generic passcode that
will need to be used once before being able to change the code to something of
you preference. To change the code, click "Passcodes" and type your desired
code then click "Ok". Passcodes can be generated for permanent, limited-time,
and single use.
Setting Your Passcode
11
Ensure the Bluetooth connection is sufcient. After connecting the phone to the
door lock, click " " to unlock. The phone must be within 16 feet of the door for
this to work. The door will always remain locked until unlocked or it is changed to
the "Passage Mode".
On the app, a voice command will sound "unlock". If an error in the Bluetooth
connection occurs, the voice command will sound "Operation Failed". If an error
in the connection occurs, close the app and start over.
Bluetooth Management