Door lock stile must be minimum 3.5 inches, and the door
thickness must be between 1 3/8 to 2 inches.
Before installing the lock, verify that all accessories and components are present.
For non pre-boarded door, please use the template provided or seek professional
help to avoid unnecessary damage.
Determine whether the handing direction of the lock is consistent with the
opening direction of the door.
Pre-Installation Checklist
3
1. Keep corrosive materials away from this lock.
2. Replace batteries when the low power alarm is activated.
3. Lubricate the lock body and cylinder annually for optimal operation
4. Check whether the lock is properly fastened every 6 months.
Maintenance & Care
To Next Page
Loading...
