Accidental discharge could result.
at all times. Loss of balance may cause personal injury.
(Fig. K)
Do not discharge
Do not use the body of the tool
or top cap as a hammer. Discharged fasteners may follow
unexpected path and cause injury. (Fig. L)
(Fig. M)
Maintenance and Repairs
tool.
Be
injuring you or a co-worker. Be aware that the nail
may follow the grain of the wood (shiner), causing it
to protrude unexpectedly from the side of the work
material. Drive the nail perpendicular to the grain to
reduce risk of injury. (Fig. N)
or with the tool at too steep an angle. Personal injury
nails may result. (Fig. O)
A protruding nail may cause injury.
compressor is set so that nails are set into the
material and not pushed completely through. (Fig. P)
area. Hold workpiece with clamps when necessary to
Be sure
the workpiece is properly secured before pressing the
nailer against the material. The contact trip may cause
the work material to shift unexpectedly. (Fig. Q)
Fig. K
Fig. L
Fig. M
Fig. N
Fig. O
To Next Page
Loading...
