To Next PageTo Next Page
Need help?Do you have a question about the Porter-Cable Laser Square LS3100 and is the answer not in the manual?
General| Type | Laser Square |
|---|---|
| Laser Color | Red |
| Power Source | Battery |
| Laser Wavelength | 635 nm |
| Laser Class | II |
| Self-Leveling Range | ±4° |
| Battery Type | AA |
| Leveling Time | ≤ 4 s |
| Laser Diode | 635 nm |
Safety guidelines related to electrical usage of the laser square.
Precautions for user safety during operation, including alertness and eye protection.
Guidelines for proper tool usage, storage, and accessory compatibility.
Information regarding qualified repair personnel and identical replacement parts.
Detailed safety instructions concerning laser operation and labels.
Safety precautions related to laser aperture and handling.
Description of the laser square's main components like apertures and power switch.
Details on the features of the mounting accessory, including tripod mounts.
Introduction to the basic operation and self-leveling functionality.
Procedures for turning the device on/off and utilizing the auto-off feature.
Understanding out-of-level and low battery indicators for proper use.
Guidance on using reflective targets and laser enhancement glasses.
Steps for replacing batteries, recommending alkaline types for longevity.
Using the sliding stud for cantilevering and rotating the laser square.
Methods for attaching the accessory via tripod, screws, straps, or magnets.
Method for checking and ensuring a surface is plumb using distance measurements.
Procedures for achieving a level line by adjusting the laser height and position.
Calculating the slope and grade of a surface using distance measurements.
Method for ensuring two surfaces are at a 90-degree angle using distance measurements.
Detailed steps for adjusting beam alignment using calibration ports and screws.
