PP6000 Command Details - Page 8
NAME:
repeatable print data in page mode
FUNCTION:
Repeatable print all buffered data
EXPLANATION:
1. This command works only in page mode.
2. In page mode, this command can repeatable print all buffered data. After printing,
it still in page mode does not return to text mode.
3. After printing, the printer does not clear the buffered data, and all printing settings
including print position remain. In other words, the starting position for next
printing in Page mode follows last position printed.
CODES
(HEX/CONTROL):
<1B> <20> <n>/ {ESC} {SP} n
NAME:
Set right-side character spacing
FUNCTION:
Set right-side character spacing
RANGE:
0 ≤ n ≤ 255
EXPLANATION:
1. Set the character spacing for the right side of the character to (n x horizontal or
vertical motion units).
2. The right-side character spacing for double-width mode is double the normal
value. When characters are enlarged, the right-side character spacing is follows
characters enlarged n times for normal value.
3. The underline mode is available in right-side character spacing.
4. If the right-side character spacing exceeds printing area, the printer sets the
printing position to the beginning of next line.
5. This command sets values independently in each mode (text and page modes).
CODES
(HEX/CONTROL):
<1B> <21> <n> / {ESC} ! n
NAME:
Select print mode
FUNCTION:
Selects print mode
RANGE:
0 ≤ n ≤ 255
To Next Page
Loading...
