Postek C168 - Roller and Interior Cleaning

36
generated by poor quality ribbons.
3. After every roll of ribbon or every three rolls of media
, the
printhead should be cleaned with
anhydrous isopropyl alcohol.
a.
Turn off the printer and open the cover.
b. Release and lift the Printhead Module.
c. Remove the ribbon (if applicable).
d.
Using a Cotton Swab dipped in anhydrous isopropyl alcohol, rub
the Swab along the printhead.
Cleaning the Platen Roller
Debris or dirt accumulated on the platen roller should be cleaned
after every three rolls of media.
a. Turn off the printer and open the cover.
b. Release and lift the Printhead Module.
c. Rotate the platen roller and clean it thoroughly with
anhydrous
isopropyl alcohol
and a cotton swab.
Cleaning the Printer Interior
With a brush or a vacuum cleaner, as needed.