To Next Page
B
brianbarrettAug 14, 2025
How to fix no sound on Power Acoustik Car Receiver?
- MMr. Ryan McconnellAug 14, 2025
If there is no sound, first cancel the mute function. If the sound is still not present, adjust the volume.
How to fix no sound on Power Acoustik Car Receiver?
If there is no sound, first cancel the mute function. If the sound is still not present, adjust the volume.
What to do if memory contents are lost on Power Acoustik Car Receiver?
If the memory contents are lost, disconnect the power wire or battery. Alternatively, press the reset button.
What to do if the disc cannot be inserted into Power Acoustik Car Receiver?
If the disc cannot be inserted, push the disc while pressing the EJECT button. It is also possible that a disc is already loaded in the mechanism. In this case, press the RESET button.
What to do if function buttons do not work on Power Acoustik Car Receiver?
If the function buttons do not work, press the RESET button.
Why is the audio skipping on my Power Acoustik Car Receiver?
If the audio is skipping, the disc might be dirty or damaged.
Why is the radio reception poor on my Power Acoustik Car Receiver?
Poor radio reception may occur if the antenna does not have the proper length or is poorly grounded. Ensure the antenna is fully extended and properly connected. If the antenna is broken, replace it with a new one. Also, check the antenna connection again to ensure it is properly grounded.
Why does the picture stop or pause on my Power Acoustik Car Receiver?
If the picture stops or pauses, the disc might be dirty or damaged, or the color system setup might be incorrect. Try adjusting to PAL or NTSC according to your TV.
Why the disc does not play in Power Acoustik Car Receiver?
If the disc does not play, it might be dirty or damaged.
Why does the disc come out automatically from my Power Acoustik Car Receiver?
If the disc comes out automatically, the temperature is outside the range of the operating temperature.
General| Display Type | LCD |
|---|---|
| Bluetooth | Yes |
| USB Port | Yes |
| SD Card Slot | Yes |
| Radio Tuner | AM/FM |
| Video Playback | Yes |
| Rear Camera Input | Yes |
| TV Tuner | Yes |
| Input Voltage | 12V DC |
| DVD Player | Yes |
| Navigation | No |
| Screen Size | 7 inch |
| Resolution | 800 x 480 |
| Power Output | 50 watts x 4 |
Important safety advice for driving, cleaning, and parking.
Cautionary note on using correct fuse ratings to prevent damage.
Identifies and explains the buttons on the front panel.
Details the various input and output ports on the rear.
Describes the reset function located on the base panel.
Details the functions of all buttons on the remote control.
Guide for installing the unit into the dashboard using the Din front-mount.
Steps for mounting the unit using the ISO standard side screw holes.
Lists the types of discs compatible with the player.
Provides advice on proper disc handling and cleaning procedures.
Visual guide on correct disc handling to prevent damage.
Instructions on how to correct rough edges on new discs.
How to turn the unit on/off and adjust volume.
Managing Mute, EQ, Loudness, and performing a factory reset.
Navigating and adjusting Sound, Picture, and Tuner parameters.
How to adjust the front panel's viewing angle and reset it.
Brake control, telephone mute, and antenna management.
How to change between FM and AM radio wave bands.
Methods for scanning and tuning radio frequencies.
How to store and recall favorite radio stations.
How to store and recall radio stations manually.
Setting the time and managing clock display behavior.
How to insert and eject discs from the player mechanism.
Functions for playing, pausing, stopping, and navigating disc content.
How to access setup menus, navigate options, and view playback info.
Enhancements like repeat, angle, slow motion, and language options.
How to connect and operate with SD and USB storage devices.
How to connect and control an iPod via the unit.
How to connect and utilize external audio/video sources.
Methods for selecting TV stations directly or via scanning.
How to save and recall preferred TV channels.
How to choose the correct audio format for TV broadcasts.
Setting the geographic area for TV tuning.
How to enter and navigate the main DVD setup menu.
Configuration for TV Display, OSD Language, and SPDIF Output.
Options for Captions, Screen Saver, and Last Memory.
Settings for Speaker setup, Downmix, and Dolby Digital Dynamic range.
Settings for TV Type, Audio, Subtitle, and Disc Menu languages.
Options for parental ratings, password, and restoring defaults.
