Why is my Power Acoustik PTID-8970NRB remote not working?
If the IR remote for your Power Acoustik Car Receiver isn't working, the battery might be dead; replace it. Also, the battery might be installed incorrectly; remove it and install it correctly.
What does 'Bad Disc' mean on my Power Acoustik PTID-8970NRB?
If 'Bad Disc' appears on the display of your Power Acoustik Car Receiver, it indicates a focus error. Press eject or RESET.
Why does my Power Acoustik PTID-8970NRB Car Receiver interrupt MP3 playback?
If an interruption occurred during MP3 playback on your Power Acoustik Car Receiver, the disc might be dirty or scratched. Clean the disc or replace it with a new one.
Why can't I repeat tracks on my Power Acoustik PTID-8970NRB when playing VCDs?
If there is no repeat or searching available while playing a VCD on your Power Acoustik Car Receiver, PBC might be on. Turn PBC off.
Why is the image on my Power Acoustik PTID-8970NRB blurred?
If the image on your Power Acoustik Car Receiver is blurred, distorted, or dark, the disc might be illegally copied. Use an original disc.
Why can't I insert a disc into my Power Acoustik PTID-8970NRB?
If you cannot insert a disc into your Power Acoustik Car Receiver, there might already be a disc inside the unit. Eject the current disc and insert a new one.
How do I fix the screen ratio on my Power Acoustik PTID-8970NRB Car Receiver?
If you are getting a prolonged image or an improper height/width ratio display on your Power Acoustik Car Receiver, there might be improper video signal connections; check the wiring and correct it. Also, the aspect ratio setup might be incorrect; use the correct aspect ratio setting.
Why is there a flashing image on my Power Acoustik Car Receiver screen?
If a flashing image or interference appears on the screen of your Power Acoustik Car Receiver, the DVD might not be compatible with the current TV system settings. Change the setup to accommodate the disc.
What to do if the front panel of my Power Acoustik Car Receiver won't open?
If the front panel of your Power Acoustik Car Receiver won't open or close, there might be an obstruction. Remove the obstruction and press OPEN to resume the monitor open/close sequence.
How to fix a Power Acoustik Car Receiver that won't turn on?
If your Power Acoustik Car Receiver isn't turning on, there are several potential causes. First, the yellow wire might not be connected properly or may have the incorrect voltage; check the connections to ensure the voltage is between 11-16vdc. Second, the black wire might not be connected to ground; verify this connection. Third, the ACC fuse or car battery fuse might be blown; in this case, install a new fuse with the correct rating. Finally, if there was an illegal operation, try pressing the RESET button.
Lists critical warnings related to product usage and potential hazards like water exposure or improper power supply.
Provides advice on product usage to prevent damage, interference, or hazards, such as cleaning and environmental conditions.
Details specific functionalities and capabilities related to Bluetooth connectivity, including phone and audio streaming.
Advises on precautions to prevent short circuits and ensure proper wiring connections, including battery and ignition wires.
Highlights critical warnings regarding battery disconnection, reconnection, and fuse replacement to prevent damage.
Covers necessary tools, safety warnings, and cautions for unit installation and removal.
Details the first procedure for installing the unit into the dashboard.
Describes the first method for removing the unit from the dashboard.
Details the second procedure for installing the unit into the dashboard.
Describes the second method for removing the unit from the dashboard.
Explains the unit's self-protection mechanism for the motorized TFT monitor when movement is halted.
Provides instructions on how to replace the batteries in the remote control if functionality is lost.
Guides the user through the process of calibrating the touch screen for accurate input.
Accesses core system configuration options like TV Type, Password, Rating, and Default settings.
Details options for setting OSD, Audio, Subtitle, and Menu languages.
Describes settings for Brightness, Contrast, Hue, and Saturation.
Covers speaker configurations and digital audio settings like Downmix and Dynamic Range.
Outlines Bluetooth settings like Auto Answer, Phone Connect, Phone Pairing, Audio Pairing, and Pin Code.
Explains the procedure for pairing a phone with the unit via Bluetooth.
Details the process for pairing an audio device with the unit via Bluetooth.
Describes audio playback controls within the Bluetooth interface, including track navigation and play/pause.
Details how to operate the unit with an iPod, controlling music and video playback.
Explains how to access and operate the unit with an SD/MMC card.
Details how to access and operate the unit with a USB device.
Guides the user through calibrating the touch screen for NAVI mode for accurate input.
Notes on installing NAVIbox, handling files, and connecting to the unit.
Explains how to use the quick access key for switching to NAVI mode and returning to previous modes.
Covers settings for screen contrast, tint, color, and brightness.
Details sound adjustments like treble, bass, subwoofer frequency, volume, and balance/fader.
Covers clock settings, screen saver options, and miscellaneous settings like radio area and EQ.
Lists common issues and solutions for the TFT monitor, such as no video or obstructed panels.
Addresses problems related to disc insertion, playback errors, and image quality.
General| Brand | Power Acoustik |
|---|---|
| Model | PTID-8970NRB |
| Category | Car Receiver |
| Language | English |
To Next Page