EasyManua.ls Logo

Power Acoustik PTID-4003 - User Manual

Power Acoustik PTID-4003
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
Mobile Video System

Questions and Answers

  • A
    Allen PettyAug 16, 2025
    How to fix no sound on Power Acoustik PTID-4003 Car Receiver?
    • R
      rhonda16Aug 16, 2025
      If there is no sound, first cancel the mute function. If the sound is still not present, adjust the volume.
  • J
    Janet GonzalezAug 19, 2025
    What to do if memory contents are lost on Power Acoustik PTID-4003 Car Receiver?
    • A
      Amber MirandaSep 12, 2025
      If the memory contents are lost, disconnect the power wire or battery. Alternatively, press the reset button.
  • W
    williamwhiteAug 22, 2025
    What to do if function buttons do not work on Power Acoustik PTID-4003 Car Receiver?
    • H
      Heidi KingAug 22, 2025
      If the function buttons do not work, press the RESET button.
  • T
    Terry SmithAug 26, 2025
    Why is the radio reception poor on my Power Acoustik PTID-4003?
    • J
      Julie ThomasAug 26, 2025
      Poor radio reception may occur if the antenna does not have the proper length or is poorly grounded. Ensure the antenna is fully extended and properly connected. If the antenna is broken, replace it with a new one. Also, check the antenna connection again to ensure it is properly grounded.
  • D
    David MitchellAug 28, 2025
    How to troubleshoot no picture on Power Acoustik PTID-4003 Car Receiver?
    • B
      Brandy LeAug 28, 2025
      If there is no picture, open the monitor. Then, choose the video input on the TV to receive the picture from the unit.
  • R
    Renee GravesAug 31, 2025
    What to do if the disc cannot be inserted into Power Acoustik Car Receiver?
    • C
      Connie McdanielAug 31, 2025
      If the disc cannot be inserted, push the disc while pressing the EJECT button. It is also possible that a disc is already loaded in the mechanism. In this case, press the RESET button.
  • D
    Donald JacobsSep 3, 2025
    Why does the picture stop or pause on my Power Acoustik PTID-4003 Car Receiver?
    • O
      ortegajesseSep 3, 2025
      If the picture stops or pauses, the disc might be dirty or damaged, or the color system setup might be incorrect. Try adjusting to PAL or NTSC according to your TV.
  • J
    Jerry JohnsonSep 6, 2025
    Why is the audio skipping on my Power Acoustik Car Receiver?
    • L
      Lisa DuarteSep 6, 2025
      If the audio is skipping, the disc might be dirty or damaged.
  • D
    Denise MooreSep 9, 2025
    Why the disc does not play in Power Acoustik PTID-4003 Car Receiver?
    • D
      Daniel CruzSep 9, 2025
      If the disc does not play, it might be dirty or damaged.
  • S
    Shelly GeorgeSep 12, 2025
    Why does the disc come out automatically from my Power Acoustik Car Receiver?
    • A
      Ashley JohnsonSep 12, 2025
      If the disc comes out automatically, the temperature is outside the range of the operating temperature.

Power Acoustik PTID-4003 Specifications

General IconGeneral
Display TypeLCD
BluetoothYes
USB PortYes
SD Card SlotYes
Audio Formats SupportedMP3, WMA
EqualizerYes
TouchscreenYes
DVD PlayerNo
Aux InputYes
Radio TunerAM/FM
DIN SizeSingle DIN
Subwoofer OutputYes
RMS Power Output50W x 4

Related product manuals