To Next Page
O
Olivia JonesJul 29, 2025
What to do if my Power Acoustik PCD-42 Car Receiver has no sound?
- BbennetttimothyJul 29, 2025
If there's no sound from your Power Acoustik Car Receiver or its external amplifier, here are a few things to check: 1. Make sure the amplifier output wiring is correctly connected according to the unit wiring diagram, and that there are no short circuits. 2. Ensure the unit is not in MUTE mode by turning off the MUTE function. 3. Verify that the RCA output is correctly connected to the external amplifier. 4. Check the wiring between the external amplifier’s REM terminal and the unit’s antenna lead, ensuring they are properly connected and that the antenna output lead is not short-circuited to ground.
General
