Appendix:
A. How to Access and Remove the E-Box
Make sure to unplug the unit before checking connecons or anything pertaining to the
electronic box (E-Box).
A. Look at drawing 140-000-000 and locate where the E- Box is situated with respect to the
Breezer.
B. Use a socket wrench with a 13mm socket and remove the boom two Hex screws.
C. Slide the E-Box out like a dresser drawer and rest it next to the Breezer.
D. Turn the E-Box upside-down, this will expose the back cover of the E-Box.
E. Removing the two hex screws with a 3.0 mm Allen key allows the cover of the E-Box to
slide off. Drawing 180-700-750 shows what is inside of the E-Box, this drawing will
demonstrate how it is electronically wired.
To Next Page
Loading...