Power Breezer Mach 4+ - Page 8

c. If the relay has + 12 on posion 0 and -12 on posion 1 and no audible “click” is
heard when the power buon (Red) is pressed on the Control Panel, change the
relay and test.
- If the “Click” is heard and there is no Fan movement, go to step 5.
Step 5 A/C Drive- the A/C Drive (VFD) provides power to the Fan Motor
- Plug-in power and press the red power buon on the control panel.
- The relay will acvate and the VFD should turn on.
- If the VFD does not turn on, turn off unit and check the wiring.
If the problem is not resolved, contact Customer Service by email at
customerservice@powerbreezer.com or by phone at 844-233-5673.
End of this secon