EasyManua.ls Logo

Power Flame C5-G-30 - User Manual

Default Icon
55 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
C MANUAL

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Power Flame C5-G-30 and is the answer not in the manual?

Summary

General Product Information

Model Identification

Details how to identify burner models based on frame size and fuel type.

Installation

Gas Supply Piping

Provides guidance on sizing and installing gas supply piping for optimal burner performance.

Oil Supply Piping

Details requirements for oil supply piping, including material, filtering, and safety considerations.

Mechanical Operation of Fuel;Air Control Modes

Figure 17 Typical Gas Burner with On-Off

Explains the mechanical operation of a gas burner with an On-Off fuel/air control mode.

Figure 18 Typical Gas Burner with Low-High-Off;Low-High-Low

Details the mechanical operation of a gas burner with Low-High-Off/Low-High-Low fuel/air control modes.

Figure 19 Typical Gas Burner with Full Modulation

Describes the mechanical operation of a gas burner with full modulation fuel/air control.

Figure 20 Typical Oil Burner with On-Off

Explains the mechanical operation of an oil burner with an On-Off fuel/air control mode.

Figure 21 Typical Oil Burner with Fixed Air Low Fire Start

Details the mechanical operation of an oil burner with fixed air low fire start fuel/air control.

Figure 22 Typical Oil or Gas;Oil Burner with Reduced Air, Low Fire Start RALFS

Explains the RALFS system for oil or gas/oil burners with reduced air and low fire start.

Figure 23 Typical Oil Burner with Low-High-Off or Low-High-Low Using Webster 22 R Oil Pump

Describes the operation of oil burners with Low-High-Off/Low-High-Low modes using a Webster 22R oil pump.

Figure 24 Typical Oil Burner with Low-High-Off or Low-High-Low Using a Two-Step Oil Pump

Details the operation of oil burners with two-step pumps in Low-High-Off/Low-High-Low modes.

Figure 25 Typical Oil Burner with Full Modulation

Explains the operation of oil burners with full modulation fuel/air control.

Start Up, All Fuel

All Fuels - General Start Up

Outlines general procedures for starting up all types of burners, emphasizing safety and proper checks.

Gas Start Up

Burner Start Up Sequence Instructions

Lists step-by-step instructions for initiating gas burner start-up procedures.

Burners Designed for Full Modulation Operation

Outlines specific adjustment procedures for burners designed for full modulation.

Oil Start Up

Burner Start Up Sequence

Lists step-by-step instructions for initiating oil burner start-up procedures.

Burners designed for Full Modulation operation.

Details procedures for adjusting modulating burners, including fuel/air ratios and linkage settings.

Servicing and Component Adjustments

General Information on Internal Bypass Oil Nozzle Systems

Discusses the design and operation of internal bypass oil nozzle systems.

Oil Nozzle Flow Rates

Presents data on oil nozzle flow rates based on pressure and capacity.

Direct Spark Oil Ignition Adjustments

Details the procedures for adjusting spark ignition electrodes for optimal performance.

Gas Pilot Ignition Adjustment

Provides guidance on adjusting gas pilot ignition for proper flame signal and stability.

Pilot Spark Ignition Electrode Adjustment

Details how to adjust pilot spark ignition electrodes for correct gap and placement.

Troubleshooting Gas, Oil, or Gas;Oil Burners

Addresses common issues like start-up failures, gas/oil operation problems, and smoke formation.

Power Flame C5-G-30 Specifications

General IconGeneral
BrandPower Flame
ModelC5-G-30
CategoryBurner
LanguageEnglish

Related product manuals