Need help?Do you have a question about the Power Flame C2-GO-15 and is the answer not in the manual?
Explains mechanical operation for On-Off and Low-High modes.
Describes mechanical operation for these modes.
Explains the mechanical operation for this oil mode.
Describes the operation of oil/gas burners with this feature.
Details operation of oil burners with Webster pump.
Describes operation with a two-step pump.
Explains operation of oil burners in full modulation.
General start-up for all fuels and specific for combination systems.
General information and step-by-step sequence for gas start-up.
Continues gas start-up and details modulation adjustments.
General information and step-by-step sequence for oil start-up.
Continues oil start-up and covers gas pilot ignition adjustment.
Addresses general burner issues and specific gas operation problems.
Continues troubleshooting for gas and oil operations.
Forms for recording gas and oil firing parameters during start-up.
General| Brand | Power Flame |
|---|---|
| Model | C2-GO-15 |
| Category | Burner |
| Language | English |
To Next Page
