Power smart DB5023 - Page 13

ASSEMBLY INSTRUCTIONS
13
16. Position the chute crank (E) so that the eye bolt with
rubber grommet (Q) inserts into the center hole of
the middle frame (B). Secure with washer (HH) and
nut (II).
Note: Do not overtighten the nut.
16
E
B
HH
II
Q
GG
Hardware Used
HH
x 1Ф6 × Ф13 × 1 Washer
II
x 1M6 Nut
GG
x 1
7 mm
Two-sided open-end wrench