25
WARNING! Always switch the product off and let it cool
down before performing inspection, maintenance and
cleaning work!
1. Clean the product with a slightly damp cloth and pH-neutral
soap. Use a brush for areas that are hard to reach.
2. Clean all of the rollers, front and rear, from grass/dirt debris. In
particular, clean the air vents with a cloth and brush.
3. Remove stubborn dirt with mower.
4. Check for worn or damaged parts. Replace worn parts as
necessary or contact an authorised service centre for repair
before using the product again.
5. Check for obvious defects, such as a loose, dislodged or
damaged cutting device, loose fixings and worn or damaged
components.
6. Check that covers are undamaged and correctly fitted. Carry
out necessary maintenance or repairs before using the
product.
7. Regularly apply lubricant to the mowers cutting surface,
cutting reel axle shaft and wheels.
1. Clean the product as described above.
2. Store the product and its accessories in a safe, dry and frost-
free, well-ventilated place.
3. Always store the product in an upright or horizontal position
in a place that is inaccessible to children. The ideal storage
temperature is between 10 and 30°C.
4. We recommend using the original packaging for storage, or
covering the product with a suitable cloth or enclosure to
protect it against dust.
Maintenance and Repair
Storage and Transportation
After every use
Cleaning, Maintenance and Repair
Storage
To Next Page
Loading...
