29
Excessive
vibration/
noise
1. Cutting blades
damaged
2. Cutting blades
not adjusted evenly
1. Contact customer
helpline
2. Blades require
adjustment (see
‘Adjusting the blade
clearance’)
Rollers do
not rotate
Roller is blocked by
debris
Clean all roller slots
WARNING! The vibration emission value during actual use
of the tool can differ from the declared value, depending on
the ways in which the tool is used. Identify safety measures
to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking into
account all parts of the operating cycle, such as the times
when the tool is switched off and when it is running idle, in
addition to the trigger time).
The sound intensity level for the operator may exceed
85dB(A) and ear protection measures are necessary.
Property Value
Model SCM32A
Rated voltage 230-240V-/50hz
Rated power 400W
No-load speed 3700rpm
Cutting height 320mm
Height of cut 18mm/28mm/38mm
Net weight 12kg
Measured sound pressure level 74dB(A), k=4 dB(A)
Measured sound power level 94dB(A), k=4 dB(A)
Guaranteed sound power level 96dB(A)
Vibration (m/s
2
) 2.323m/s
2
K=1.5m/s
2
Technical Data
Technical Data Table
To Next Page
Loading...
