PowerBox Systems MERCURY SR2 User Manual

www.powerbox-systems.com 3
For PowerBox and Jeti pilots it is possible to control and adjust virtually every* as-
pect of the PowerBox Mercury SR2 from your transmitter! Full telemetry for battery
and receiver data is present for all supported systems
*With the exception of the door sequencer and Setup Assistant
.
FEATURES
+ 16 channels
+ High-performance battery backer with high continuous load capacity
+ OLED screen, legible in sunlight
+ Bi-lingual menu system
+ Consistent duplication of all power electronics
+ Redundant electronic switch
+ Servo matching for all 16 outputs
+ Auto matching function
+ Door sequencers with Setup Assistant
+ The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
+ Nine independent gyro outputs for: 3x aileron, 3x elevator, 3x rudder
+ Individual gain control for all nine gyro outputs
+ Special regulatory algorithm for xed-wing models
+ System detects all transmitter mixers
+ Four selectable output voltages: 6.0V or 7.8V
+ Fast basic setup procedure using the sophisticated Assistant
+ Optional GPSIII or PBS-TAV for speed-dependent gyro compensation
+ Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2,
Multiplex M-Link, JR DMSS and Graupner HoTT
+ Transmission of battery, receiver and GPS*/TAV* data
+ Virtually all features can be controlled from PowerBox and Jeti transmitters
+ Selectable servo frame rate: 12ms, 14ms, 16ms, 18ms
+ Servo feedback current suppression
+ High-performance machined heat-sink for optimized heat diffusion
+ Machined, anodized aluminium switch and screen case
+ Compact dimensions
*with
GPS III

PowerBox Systems MERCURY SR2 Specifications

General

Brand	PowerBox Systems
Model	MERCURY SR2
Category	Power Supply
Language	English