PowerBox Systems MERCURY SR2 User Manual

www.powerbox-systems.com 33
13. TECHNICAL DATA
Operating voltage 4,0 V - 9,0 V
Power supply 2s LiPo, 2s Lilon, 2s LiFePo, 5s NiMH
Current drain, operating 100 mA
Current drain, stand-by 30 µA
Maximum current capacity 2 x 20 A continuous (<30 s: 2 x 40 A
Drop-out voltage 0,3 V
Output voltage 6,0V or 7,8V
Signal input Serial
RC systems supported PowerBox, Futaba, Jeti, Spektrum,
M-Link, JR und Hott
Receiver redundancy SRS
Channels 26
Servo outputs, total 16
Servo signal resolution 0,5 µs
Signal repeat rate 12 ms, 14 ms, 16 ms, 18 ms
Gyro modes Heading mode, Normal mode
Gyro sensor type External iGyro SAT
Number of sensor axes 9
Telemetry systems supported P²BUS, S.BUS2, EX-Tele, SRXL2,
M-Link, DMSS, Hott
Dimensions 107 x 69 x 19 mm
Weight 85 g
Weight, Sensor-Switch 15 g
Temperature range -30 °C bis +75 °C
14. SET CONTENTS
- PowerBox Mercury SR2
- OLED-Display
- SensorSwitch
- 2 patch-leads
- 8 retaining screws
- 4 rubber grommets and brass sleeves
- Operating instructions

PowerBox Systems MERCURY SR2 Specifications

General

Brand	PowerBox Systems
Model	MERCURY SR2
Category	Power Supply
Language	English