16
Charging PowerDot
PowerDot PD-02 device can be recharged from any reliable USB connection (e.g. laptop, mobile phone charger, wall
USB charger, etc.). It takes around 60 minutes for the device to go from zero level to full charge.
NEVER charge PowerDot when it is attached to the patient’s body.
Always use an original charging cable provided with PowerDot.
NEVER charge PowerDot from unreliable or problematic sources.
When using 3
rd
party party USB AC chargers, we recommend unplugging the AC plug from the wall
before contacting PowerDot device.
PowerDot PD-02 uses UL 1642 and UN 38.3 certified built-in Lithium Polymer battery, which requires recharging
after approximately 5-6 hours of continuous usage. The battery will last for at least 500 charging cycles.
If you plan to store PowerDot PD-02, unused, for longer than six months, charge it to at least 50% every six months.
In the PowerDot Doctor App, the current battery charge level is displayed at the Stimulation and is also available on the
Devices screen.
When you see the ORANGE charging light next to micro-USB connector, this means PowerDot is currently charging.
Once PowerDot is fully charged, the ORANGE light will turn off.
To Next Page
Loading...
