The engine stops
Problem
The engine cuts out suddenly
Cause
Loose spark plug cable The fuel
has run out
Clogged carburetor
Clogged fuel tank opening. Unplug fuel mixed with
water Change fuel
Solution
Connect the cable securely
refuel
Clean the carburetorThe engine cuts out gradually
Spraying
Problem
No release of chemicals
Cause
Clogged nozzle or nozzle valve
Clogged delivery tube Clean chemical tube
Solution
Clear clogged components
Leakage of a chemical mixture Cover
incorrectly mounted
down spraying. Reinstall the cover correctly
Dusting
Problem
No dusting
dusting
or uneven Powder exit cannot adjust Adjust the dust exit lever
open
Contaminated
powder / granules
Lumpy powder / granules
Wet powder / granules
correct Dust outlet does not close
Dust outlet is blocked Clean the dust outlet for foreign objects
Powder / granules come out The dust cover clamp is in. Press the clamp off the hopper
loose
Damaged lid seal Replace the dust seal
Level Unable to control Powder / granulate
discharge damaged controlling
powder / granules
Dust output no it works
Cause Solution
Clean the powder / granules
Crush the powder / granules
Dry the powder / granules
Adjust the dust outlet jack
device Repair device
exit
Maintenance and preparation for extended storage
Maintenance of spray components
1. Thoroughly clean the sprayer tank after spraying
11
To Next Page
