2. Thoroughly clean the sprayer tank and powder / granulate outlet after dusting
3. After work, loosen the tank cover
4. After cleaning the device, run the engine at low speed for 2-3 minutes
Maintenance of the fuel system
1. Gasoline residues in the carburetor may adversely affect the operation of the fuel system and engine operation, after
using the device for a week, drain all the gas from it.
Maintaining the air filter and spark plug
1. Clean the air filter after work
2. The gap between the spark plug electrodes should be 0.6-0.7mm. Check that the gap between the electrodes is
correct and adjust it if necessary
3. Always check the spark plug model of the appliance. Do not use any other candle models
Preparation for long-term storage
1. Clean the device. Coat metal parts with oil or other anti-corrosive substance.
2. Remove the pipe from the candle. Pour 15-20 g of two-stroke oil into the cylinder. Set the plunger to the top position and then put
the plug on the spark plug
3. Remove the tank and clean it thoroughly, then mount it on the device
4. Clean the spraying system thoroughly
5. Drain the fuel tank and clean the carburetor of fuel
6. Cover the machine and leave it in a dry, clean place
DISPOSAL OF USED DEVICES
At the end of its useful life, this product must not be disposed of with normal household
waste, but should be taken to a collection point for the recycling of electrical and electronic
devices. This is indicated by the symbol on the product, manual or packaging. Thanks to
the reuse, use of materials or other forms of using used devices, you make a significant
contribution to the protection of our environment.
12
To Next Page
