To Next PageTo Next PageWhat to do if my PowerMax XP10000E Portable Generator has no electricity at the AC receptacles?
If there's no electricity at the AC receptacles of your PowerMax Portable Generator, first ensure that the AC circuit breaker is turned ON. Also, check the connected electrical appliance or equipment for any defects. If defective, replace it or take it to an electrical shop for repair.
Why won't my PowerMax XP10000E Portable Generator engine start?
If your PowerMax Portable Generator engine won't start, there could be several reasons. First, check if there is fuel in the tank and refill it if needed. Next, verify that there is enough oil in the engine and add the recommended oil if necessary. Also, inspect the spark plug to ensure it is in good condition; readjust the gap and dry it, or replace it if required. Finally, check if the fuel is reaching the carburetor, and if not, clean the fuel sediment cup.
Guides users on safe generator operation and supervision.
Details risks associated with carbon monoxide gas and ventilation needs.
Explains dangers of electrocution from wet conditions and improper connections.
Covers risks of igniting materials from hot exhaust and flammable gasoline.
Describes how to select between 120V and 120/240V output modes.
Details the AC circuit breaker's function for overload and short circuit protection.
Describes the AC circuit protectors for specific receptacles and overload protection.
Step-by-step guide for installing the generator's wheel kit.
Instructions for correctly connecting the battery starter cables.
Details how to check and maintain the engine oil level before operation.
Instructions for checking and refueling the generator with gasoline.
Step-by-step procedure for starting the generator engine.
Procedures for safely stopping the generator engine in normal and emergency use.
Guidelines for safely connecting the generator to a building's electrical system.
Steps for operating the generator with AC appliances and charging DC batteries.
Guidance on selecting and using different AC receptacles for balanced load.
Emphasizes the necessity of regular maintenance for safety and performance.
Outlines safety precautions to follow during maintenance procedures.
Provides a schedule for routine checks and services based on usage intervals.
Step-by-step instructions for draining and refilling engine oil.
Guide on cleaning and servicing the air cleaner element for optimal performance.
Instructions for cleaning the fuel sediment cup to prevent carburetor issues.
Procedures for inspecting, cleaning, gapping, and replacing the spark plug.
Recommended service procedures for storing the generator for various durations.
Lists possible causes and solutions for the engine failing to start.
Addresses issues related to the generator not providing power to receptacles.
Guides users on safe generator operation and supervision.
Details risks associated with carbon monoxide gas and ventilation needs.
Explains dangers of electrocution from wet conditions and improper connections.
Covers risks of igniting materials from hot exhaust and flammable gasoline.
Describes how to select between 120V and 120/240V output modes.
Details the AC circuit breaker's function for overload and short circuit protection.
Describes the AC circuit protectors for specific receptacles and overload protection.
Step-by-step guide for installing the generator's wheel kit.
Instructions for correctly connecting the battery starter cables.
Details how to check and maintain the engine oil level before operation.
Instructions for checking and refueling the generator with gasoline.
Step-by-step procedure for starting the generator engine.
Procedures for safely stopping the generator engine in normal and emergency use.
Guidelines for safely connecting the generator to a building's electrical system.
Steps for operating the generator with AC appliances and charging DC batteries.
Guidance on selecting and using different AC receptacles for balanced load.
Emphasizes the necessity of regular maintenance for safety and performance.
Outlines safety precautions to follow during maintenance procedures.
Provides a schedule for routine checks and services based on usage intervals.
Step-by-step instructions for draining and refilling engine oil.
Guide on cleaning and servicing the air cleaner element for optimal performance.
Instructions for cleaning the fuel sediment cup to prevent carburetor issues.
Procedures for inspecting, cleaning, gapping, and replacing the spark plug.
Recommended service procedures for storing the generator for various durations.
Lists possible causes and solutions for the engine failing to start.
Addresses issues related to the generator not providing power to receptacles.
General| Voltage | 120/240V |
|---|---|
| Frequency | 60 Hz |
| Fuel Type | Gasoline |
| Power Output | 10000 watts |
| Starting System | Electric/Recoil |
| Noise Level | 74 dBA |
| Outlet Types | (1) 120V 30A Twist-Lock Outlet |
| Wheel Kit | Yes |
| Dimensions (L x W x H) | 27.2 x 27 x 24.4 inches |
