POWERSIDE PQube 3 - MS1 Module to GPS1 Receiver 8-Pin Cable Pinouts

Page 40 of 49
Manual#: 851-000134
Version 3.4 – 08/11/2022
5.6 MS1 Module to GPS1 Receiver 8-pin Cable Pinouts:
MS1 Pin-Out with pin 1 on left while
looking at module from the front
GPS1 Receiver Pin-Out based on
standard RJ-45 Ethernet pin-out
Pin#
Net Name
Function
Wire Color*
1
ANT_PPS -
Pulse per
Second -
Orange/White
2
ANT_PPS+
Pulse per
Second +
Orange
3
ANT_RX -
Received
Data -
Green/White
4
ANT_TX+
Transmitted
Data +
Blue
5
ANT_TX -
Transmitted
Data -
Blue/White
6
ANT_RX+
Received
Data +
Green
7
ANT_COM
Power
Supply
Return
Brown/White
8
ANT_25V
Positive
Power
Supply
Brown
Pin #
Net Name
Function
Wire Color*
1
ANT_PPS -
Pulse per
Second -
Orange/White
2
ANT_PPS+
Pulse per
Second +
Orange
3
ANT_RX -
Received
Data -
Green/White
4
ANT_TX+
Transmitted
Data +
Blue
5
ANT_TX -
Transmitted
Data -
Blue/White
6
ANT_RX+
Received
Data +
Green
7
ANT_COM
Power
Supply
Return
Brown/White
8
ANT_25V
Positive
Power
Supply
Brown
*Wire color is based on standard Ethernet cable used to interface between MS1 Module and
GPS1 Receiver.