powersoft DIGAM series User Manual

POWERSOFT
ENGLISH -4
Verify that your main connection is capable to satisfy the power ratings of the device.
Do not spill water or other liquids into or on the unit.
Do not use this unit if the electrical power cord is frayed or broken.
Do not remove the cover. Removing the cover will expose you to potentially dangerous voltage.
Contact the authorized center for ordinary and extraordinary maintenance.
SPEAKER DAMAGE
The DIGAM series amplifiers are among the most powerful professional amplifiers available and are
capable of producing much more power than many loudspeakers can handle. It is the user’s
responsibility to use
suitable speakers with the amplifier and to use them in a sensible way that will not cause damage.
Powersoft will not be responsible for damaged speakers. Consult the speaker manufacturer for
power-handling recommendations.
Even if you reduce the gain using the amplifier’s front panel attenuation controls, it is still possible to
reach full output power if the input signal level is high enough.
A single high-power crescendo can damage high-frequency drivers almost instantaneously, while
low-frequency drivers can usually withstand very high, continuous power levels for a few seconds
before they fail. Reduce power immediately if you hear any speaker “bottoming out” - harsh pops or
cracking distortion that indicate that the speaker voice coil or diaphragm is striking the magnet
assembly.
Powersoft recommends that you use amplifiers of this power range for more headroom (cleaner
sound) rather than for increased volume.
SPEAKER OUTPUT SHOCK HAZARD
A DIGAM amplifier is capable of producing hazardous output voltages. To avoid electrical shock, do
not touch any exposed speaker wiring while the amplifier is operating. This manual contains
important information on operating your DIGAM amplifier correctly and safety. Please read it
carefully before operating your amplifier. If you have any questions, contact your Powersoft dealer.
This manual contains important information on operating your DIGAM amplifier correctly and
safety. Please read it carefully before operating your amplifier. If you have any questions,
contact your Powersoft dealer.

powersoft DIGAM series Specifications

General

Series	DIGAM
Dimensions	Varies by model
Weight	Varies by model
Output Power	Varies by model
Frequency Response	Varies by model
Signal-to-Noise Ratio	Varies by model
Total Harmonic Distortion	Varies by model
Input Sensitivity	Varies by model
Input Impedance	Varies by model
Cooling System	Varies by model
Power Supply	Varies by model