POWERSOFT
ENGLISH - 3
Important
CAUTION
DO NOT OPEN
!
CAUTION: To reduce the risk of electric shock, do not remove the cover. No user-serviceable parts inside. Refer servicing
to qualified service personnel.
WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture.
SAFEGUARDS: Electrical energy can perform many useful functions. This unit has been engineered and manufactured to
assure your personal safety. Improper use can result in potential electrical shock or fire hazards. In order not to defeat the
safeguards, observe the following instructions for its installation, use and servicing.
NOTES:
This equipment has been tested and found to comply by Competent Body (Directive 89/336/EEC-EMC) pursuant to the
product family standard for audio professional use:
EN 55103-1 and EN 55103-2 standard (with the limits for E1 and E2 electromagnetic environment); EN61000– 3 – 2, EN
This equipment has been tested and found to comply by Notyfed Body (Directive 73/23/EEC L.V) pursuant to the audio
apparatus safety requirements:
Standard EN 60065.
Warning Notices
LOCATION
Install the amplifier in a well-ventilated location where it will not be exposed to high temperature or
humidity.
Do not install the amplifier in a location that is exposed to direct rays of the sun, or near to hot
appliances or radiators. Excessive heat can adversely affect the cabinet and internal components.
Installation of the amplifier in a damp or dusty environment may result in malfunction or accident.
PRECAUTIONS REGARDING INSTALLATION
Placing and using the amplifier for long periods on heat-generation sources will affect performances.
Avoid placing the amplifier on heat-generating sources.
Install this amplifier as far as possible from tuners and TV sets. An amplifier installed in close
proximity to such equipment may cause noise or degradation of the picture.
SAFETY RULES
This device must be powered exclusively by earth connected mains sockets in electrical networks
compliant to the IEC 364 or similar rules. Is absolutely necessary to verify this fundamental
requirement of safety and, in case of doubt, require an accurate check by a qualified personal.The
constructor cannot be considered responsible for eventual damages caused to persons, things or
data for the missing of accurate earth link.Before powering this device verify that the amplifier is
supplied with the correct voltage rating.
To Next Page
Loading...
Need help?
General
