POWERSOFT
ENGLISH - 9
Input/output protection
An ultrasonic network decouples RF from the outputs and keeps the amplifier stable with reactive
loads.
User Maintenance
Cleaning: Disconnect the amplifier from the AC main source first; use a soft cloth and mild non-
abrasive solution to clean the faceplate and chassis.
Dust removal: Especially in a dusty environment, the heat sink may clog with dust after prolonged
use, which will interfere with cooling. You may use compressed air to remove the dust; severe cases,
though, should be referred to qualified service personnel for a thorough cleaning with the top cover
removed.
There are no user-serviceable parts in your DIGAM amplifier. Refer servicing to qualified technical
personnel.
In addition to having an in-house service department, Powersoft supports a network of authorized
service centers. If your DIGAM amplifier needs repair, contact your Powersoft dealer or distributor, or
contact the Powersoft Technical Service department, to obtain the location of the nearest authorized
service center.
Warranty and disclaimers
Disclaimer
Powersoft is not liable for any damage to speakers, amplifier, or any other equipment that is caused
by negligence or improper installation and/or use of the DIGAM amplifier.
Product warranty
Powersoft guarantees the DIGAM to be free from defective material and/or workmanship for a period
of one year from date of sale. Powersoft will replace defective parts and repair malfunctioning
products under this warranty when the defect occurs under normal installation and use. The unit must
be returned to our factory via prepaid transportation with proof of purchase (sales receipt). This
warranty provides that examination of the returned product must disclose, in our judgment, a
manufacturing defect. This warranty does not extend to any product that has been subject to misuse,
neglect, accident, improper installation, or where the date code has been removed or defaced.
Technical assistance and service
Servicing your unit requires a trained technician capable of performing the type of service you need.
There are no user serviceable components inside your unit and the danger of electric shock exists.
Additionally, some of the components in your unit are Powersoft specific parts that require Powersoft
replacements.
To Next Page
Loading...
Need help?
General
