11
DigiMod 500 1000 1500 2000HV 1000NPS | SERVICE MANUAL
INDEX
7. DC Voltage Testing:
Connect a DC Power Supply to the CN4 connector by means of
the PSU AUX VOLTAGE CABLE. (Fig. 11)
Slowly increase the voltage to +18V, and verify the consumption, it
should be as stated in the following table.
Model Consumption
DigiMod 500 20 mA ±10%
DigiMod 1000 20 mA ±10%
DigiMod 1500 20 mA ±10%
DigiMod 2000HV 20 mA ±10%
18Vdc 20mA
(Fig. 11)
Model Kit Number Description
DigiMod 500
KT000818.R KIT DM500 PSU
DigiMod 1000
KT000820.R KIT DM1000 PSU
DigiMod 1500
KT000823.R KIT DM1500 PSU
DigiMod 2000
KT000827.R KIT DM2000 PSU
In case of any faults in the aforementioned components, please refer
to the table below when ordering the Repair Kit.
To Next Page
Loading...
Need help?
General