6
LiteMod User Guide
7
7 : 1.Welcome
Congratulations on your purchase of the Powersoft
LiteMod module.
We know you are eager to use the LiteMod module, but
please take a moment to read this user’s manual and safety
instructions. In case you have any questions, please do not
hesitate to contact your dealer or Powersoft.
The LiteMod is a two channel amplier modules speci-
cally designed to drive high power loudspeakers now avail-
able in two fashions: the LiteMod delivering up to 600 W on
4 Ω per channel and the LiteMod HV capable to reach up to
700 W on 8 Ω per channel, all channels driven.
The LiteMod represents an important evolution in power
amplier modules: extremely compact and lightweight
LiteMod can be easily integrated into any appliance such as
active loudspeakers and stand alone rack ampliers.
The new design of the power supply equipped
with PFC, reduces power consumption (less than
0.55 W in standby) while enhancing reliability and
consistency in all operating conditions. The high ef-
ciency of the output stage improves overall perfor-
mance delivering pristine power and clean output signal.
A dedicated optional DSP board can be easily plagged to
the module providing a complete solution in a compact
package.
Powersoft LiteMod is the ultimate exible platform suit-
ing your application design.
7 : 2.Unpacking & checking for shipping damage
Your Powersoft product has been completely tested and
inspected before leaving the factory. Carefully inspect the
shipping package before opening it, and then immediately
inspect your new product. If you nd any damage notify the
shipping company immediately.
7 : 3.Disposal of the packing material
The transport and protective packing has been selected
from materials which are environmentally friendly for dis-
posal and can normally be recycled.
Rather than just throwing these materials away, please
ensure they are offered for recycling.
LiteMod | 1
To Next Page
Loading...
