powersoft LiteMod - Specifications; LiteMod Specifications; LiteMod HV Specifications

12 | LiteMod and LiteMod HV | User guide
General
Number of channels 2
Output power
2-channel mode
4 Ω / Ch (balanced) 600 W
8 Ω / Ch (balanced) 400 W
bridged mode
8Ω / Ch pair 1200 W
Max output voltage 85 V
peak
Max output current 31 A
peak
General
Number of channels 2
Output power
2-channel mode
8 Ω / Ch (balanced) 700 W
bridged mode
16Ω / Ch pair 1400 W
Max output voltage 120 V
peak
Max output current 31 A
peak
AC Mains Power
Power supply Universal, regulated switch mode
Nominal power requirement AC 100 V - 240 V, 50/60 Hz with PFC
Operating voltage AC 90 - 264 V
Power factor cos = 0.9 @ 360 W
Consumption
Standby 0.5 W
Idle 13.5 W
1/8 of max output power @ 8 Ω 220 W
AC Mains Power
Power supply Universal, regulated switch mode
Nominal power requirement AC 100 V - 240 V, 50/60 Hz with PFC
Operating voltage AC 90 - 264 V
Power factor cos = 0.9 @ 360 W
Consumption
Standby 0.5 W
Idle 18 W
1/8 of max output power @ 8 Ω 260 W
Audio
Gain 26 dB
Frequency response 20 Hz - 33 kHz ( +0/-1 dB) @ 1 W, 8 Ω
S/N ratio 115 dB
Crosstalk separation 85 dB @ 1 kHz
Input sensitivity @ 8Ω 3 V
rms
/ 11.7 dBu
Input impedance 10 kΩ balanced
THD+N / DIM100
< 0.08% from 0.1 W to full power
(typically <0.05%)
Slew rate 50 V/µs @ 8 Ω, input lter bypassed
Damping factor @ 8Ω > 10000 @ 100 Hz
Audio
Gain 26 dB
Frequency response 20 Hz - 33 kHz ( +0/-1 dB) @ 1 W, 8 Ω
S/N ratio 119 dB
Crosstalk separation 85 dB @ 1 kHz
Input sensitivity @ 8Ω 4.23 V
rms
/ 14.7 dBu
Input impedance 10 kΩ balanced
THD+N / DIM100
< 0.08% from 0.1 W to full power
(typically <0.05%)
Slew rate 50 V/µs @ 8 Ω, input lter bypassed
Damping factor @ 8Ω > 10000 @ 100 Hz
AUX supplies
Fan plug (+12 V), max supply current draw 150 mA
Max aux supply current draw @ +12 V 500 mA
Max aux supply current draw @ –12 V 200 mA
Max aux supply current draw @ +5V 100 mA
AUX supplies
Fan plug (+12 V), max supply current draw 150 mA
Max aux supply current draw @ +12 V 500 mA
Max aux supply current draw @ –12 V 200 mA
Max aux supply current draw @ +5V 100 mA
Construction
Dimensions L x W x H
230 mm x 80 mm x 43.5 mm
9” x 3.1” x 1.7”
Weight 870 g (1.92 lb)
Construction
Dimensions L x W x H
230 mm x 80 mm x 43.5 mm
9” x 3.1” x 1.7”
Weight 870 g (1.92 lb)
14
Specifications
LiteMod
LiteMod HV