PowerTec 71402 - Parts and Contents; Assembly

ASSEMBLY PARTS AND CONTENTS
4
4
ASSEMBLY
4
UNPACKING
Check for shipping damage. Check immediately whether all parts and accessories areincluded.
Table Assembly Refer to Figure 1
Shows the contents off the table assembly
ITEM DESCRIPTION QTY
AA Legs 4
BB
Long Tie Bars (26" long x 2-3/4" wide with
two 3/4" anges
2
CC
Short Tie Bars (18" long x 2-3/4" wide
with two 3/4" anges)
2
DD Carriage Bolts 5/16"-18 x 3/4" 16
EE Nuts 5/16"-18 16
FF Lock Washers 5/16" 16
GG Table Top (15-3/4" wide x 23-5/8" long x 1" thick) 1
HH
Hexagon set screw 1/2"-20*25LX
(3/8"- 24 internal thread)
4
II Hex nut 1/2"-20 4
JJ
Adjustment screw 3/8"-24
(1/4"-20 internal thread)
4
KK Hex nut 3/8"-24 4
LL Stri-head locking screw (1/4"-20) 4
MM Main Resin Insert 1
NN
Reducing Rings
(Includes solid insert, 1" & 2-5/8" opening)
3
OO Screw M3P0.5 x 8mm 3
PP M5 Starting pin with M6 Insert (0609, 0610) 1
QQ Screw 3/16" x 5/8" L 8
Figure 1
Fence Assembly Refer to Figure 2
Shows the contents off the fence assembly
ITEM DESCRIPTION QTY
A Fence 1
B Fence lock knobs 5/16"-18 2
C Washers 5/16" 2
D T-Bolt 5/16"-18 x 1-1/ 2" 4
E MDF adjustable fence faces 2
F Flat head screws 1/4"-20 x 1-1/2" 4
G Wing Knobs, 1/4"-20 6
H Bit guard 1
I T-Bolts 1/4"-20 x 1" 2
J Nylon Washer 1/4" 2
K Router dust port 1
L Pan head screws M4 x 10 mm 2
M Washers 1/4" 2
N Featherboard 1
O Nylon Spacers 2
P Tape measure with adhesive backing
(right to left)
1
Q 3" Flip stop 1
R 4 mm Round Rods 2
S 1/4" Square Rods 2
T Wing Knobs, 5/16"-18 2
Figure 2