Need help?Do you have a question about the PowerTech MB3908 and is the answer not in the manual?
General| Brand | PowerTech |
|---|---|
| Model | MB3908 |
| Category | Battery Charger |
| Language | English |
Describes the function of the MODE selection button for changing charging modes.
Details Mode 1 for 24V batteries with 3.75A charging current.
Details Mode 2 for 12V batteries with 7.5A charging current.
Explains Mode 3 for 12V or 24V batteries in cool conditions.
Details Mode 4 for Advanced AGM 12V batteries with 7.5A.
Details Mode 5 for recovering 12V batteries with 7.5A.
Explains Mode 6 for SMPS 13.6V power supply at 5.0A.
Details Mode 7 for Lithium 12.8V batteries with 5.0A.
Describes the battery level indicator on the LCD display.
Indicates the current voltage of the connected battery.
Shows the charging current when a mode is selected.
Explains the error message for a disconnected battery.
Explains the error message indicating a battery fault.
Explains the error message for incorrect polarity connection.
Covers measures to prevent electric shock during operation and connection.
Details risks of explosion from gases and fire, and prevention methods.
Warns about chemical burns from battery acid and required protective measures.
Explains the ten-phase charging strategy from Step 1 to Step 8.
Details Step 9 (Maintenance 1) and Step 10 (Maintenance 2) for battery upkeep.
Details how the charger identifies a 12V battery based on voltage.
Explains the process for identifying 24V batteries and potential errors.
Enables charging of zero volt batteries, typically lithium packs.
Details the automatic reduction of power output when the appliance overheats.
Describes the charger's function of maintaining a fully charged battery.
To Next Page
