Need help?Do you have a question about the PowerTech MB-3632 and is the answer not in the manual?
General| Brand | PowerTech |
|---|---|
| Model | MB-3632 |
| Category | Battery Charger |
| Language | English |
Features AUTO function to prevent overcharging and minimize trouble through two-way linkage.
Employs an individual-cell-voltage balancer, eliminating the need for an external one.
Monitors and balances each cell during discharge; ends process if any cell is abnormal.
Supports Li-ion, LiPO, and the new LiFe series of batteries.
Offers 'fast' charge for speed and 'store' state for long-term battery protection.
Formula for calculating safety timer based on capacity, current, and a factor of 11.9.
Guides setting parameters for Lithium batteries, emphasizing voltage and current accuracy.
Balances cell voltages during charging by monitoring and controlling input current per cell.
Illustrates pin assignments for connecting LiPo battery balance leads (8-pin).
Program for charging/discharging batteries for storage, classified by voltage type.
Sets discharge current and voltage, ensuring it's not below manufacturer's recommendation.
For charging/discharging NiCd/NiMH batteries for R/C models, allows parameter adjustment.
Program for charging Pb batteries, with specific current restrictions and recommendations.
Sets discharge current and voltage for Pb batteries, with warnings about deep discharging.
Explains how to view user settings and cell voltages during operation.
To Next Page
