PowerTech MB-3632 User Manual

STORAGE DATA PROGRAM
Storage data program
For your convenience, the MB-3632 has a data storage and load program. It can store five battery data
representing the respective specifications of batteries. You can call back the data when charging or
discharging without setting up the program again. Press START/ENTER key to make it blink, and use
INC or DEC to set up the parameter.
[-I
I Start
E er
Volt ge ~~::be'tt,t apacitY~~ft:~1
,iJlf"
~DECIINC~ ~DE~ ~NC~
~
~
~DEC iN~ I ~DEC +INC~
~DE INC~
I
Setting of the parameter in the screen will not affect the charge and
discharge process. They just present the specification of the battery.
The example is NiMH battery pack, including 12 celis, the capacity is
3000m Ah.
Set up the charge current in the manual mode, or current limit in the auto
mode. Press INC and DEC key simultaneously to make the current field
blink to switch the charge mode.
Set up the discharge current and final voltage.
Set up the charge/ discharge sequence and cycle number.
Saving the data

PowerTech MB-3632 Specifications

General

Brand	PowerTech
Model	MB-3632
Category	Battery Charger
Language	English