PowerTech MB-3632 - Storage Control of Lithium Battery; Discharging of lithium battery

"",I
~DEC INC~ I ~DEC INC~
Batt type Start
Stop Enter '>3 seconds'
STORAGE CONTROL OF lITHIUMBATTERY
At this screen, you can set up the current and voltage of the battery
pack Charging and discharging will make the batteries come to the
voltage level of "storage" state
This screen shows the real-time status charging. Press BATT
TYPE/STOP key once to stop the charge process.
LIP 0 0 ISC HARGE
1 0 A 1 1 1 V{3 S)
Discharging of lithium battery
The value of discharge current on the left can not exceed 1C, and the
value on the right can not be under the voltage recommended by the
manufacturer to avoid deep discharging. Press START/ENTER for
more than 3seconds to start charging.
I
Batt type
Stop
Start
Enter '>3 seconds'
,--------,
Lr3S 0 4A 12 59V
DSC 02 24300 682
This shows the real-time status of discharging, you can press BATT
TYPE/STOP key to stop discharging.