3
PRODUCT SPECIFICATIONS:
BOX CONTENTS:
Input Voltage: 220 - 240 V ~ 50/60 Hz, 2A
Power consumption: 300 W Max
Reverse current*: < 10 mA (no AC input)
Nominal output voltage: 12 VDC / 24 VDC / 12.8 VDC/ 13.6 VDC
Nominal output current: 15 A / 7.5 A / 15 A / 5.0 A
Charging voltage: 14.5V / 14.7V for 12V battery, 29 V /
29.4V for 24V battery, 14.5V for Lithium
(12.8V 4-cells LiFePO4), 13.6V for SMPS.
Charging current: 15 A ± 10 %, 7.5 A ± 10 %, 5.0 A ± 10 %
Battery type: 12V lead-acid battery 50Ah - 400Ah
24V lead-acid battery 25 Ah - 200Ah
Lithium (12.8V 4-cells LiFePO4):
capacity of 30 - 200Ah
Housing protection type: IP 65 (dust-proof, water-proof)
Safety class: II
*Reverse current is the current used by the charging station battery, when
no mains current is connected.
Check the appliance and all accessories for damage immediately after
unpacking. Do not put a defective appliance or parts into operation.
• MB3910 Charger
• Clamps Cable
• Eyelet M10 Cable
• Instruction Manual
To Next Page
Loading...
Need help?
General
