1
Use for the intended purpose
The MB3912 is a battery charger with a pulse trickle charge mode and is
suitable for charging and maintenance charging of the following 12 V or 24
V lead rechargeable batteries with Wet, Gel, AGM, 12.8V 4-cells LiFePO4 and
16V 4-cells LiFePO4:
• 12 V: with a capacity of 50 - 500 Ah
• 16 V: with a capacity of 25 - 250 Ah
• 24 V: with a capacity of 25 - 250 Ah
• Lithium (12.8V 4-cells LiFePO4): with a capacity of 30 - 200 Ah
• Lithium (16V 4-cells LiFePO4): with a capacity of 25 - 250 Ah
You can also used it to regenerate completely discharged batteries. The
battery charger has protective circuits to prevent sparking and overheating.
Any incorrect or improper use leads to loss of the warranty. The manufacturer
takes no responsibility for damage(s) arising out of usage that is contrary to
the instructions laid down. The appliance is not meant for commercial use.
INTRODUCTION:
Please read these instructions for use carefully and completely, and take
note of all instructions and specifications.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
To Next Page
Loading...
Need help?
General
