PowerTech MP3755 - Function Settings; Battery Mode Configuration

10



4.FunctionsettingsandLCDiconsareasfollows:
PressandholdMenufor2secondsinthedefaultstatetoentertheSettingsinterface,
presstheMenubuttonrepeatedlytoswitchtobatterycategorysetting,WIFIswitch
setting, undervoltage protection setting, restart voltage setting after undervoltage,
clock setting, timer switch setting, dawn load TO mode, and dawn load Ld mode.
Pressthe“OK”buttontoenterdesiredfunction,presstheUP/DOWNbuttontoselect,
andthenpress“OK”toconfirm.
Batterycategorymode

AboveistheAGMbatterymode.
