8 GTS Series Uninterruptible Power Manager
MopUPS Express
POWERVAR GTS Series smart communications give you several
options for:
• Protecting data on a computer powered by GTS when battery runs low
• Monitoring the GTS to allow analysis of site power history and GTS
health
An RJ11 port provides a standard basic-signal interface that works with
Legacy and open source UPS monitoring software to trigger automated
computer shutdown on low battery conditions.
The smart USB port links your GTS Series directly in to Windows, Linux
or MAC OS as an HID device -- without need for additional USB device
drivers. Use native OS Power Management utilities for automatic safe
shutdown on low battery.
If you want added functionality including; data and event logging, auto-
run command les before shutdown, access to GTS conguration
and integrated network agent for central monitoring via POWERVAR
ManageUPS
®
CIO Server software, download and use POWERVAR
software MopUPS
®
Express (Windows only)
(See page 18 for more information)
User Replaceable Battery
Eventually every UPM requires a new battery. POWERVAR expects
the battery in your GTS Series UPM to last a minimum of two years
– perhaps longer if power outages are short and infrequent. The GTS
Series makes battery replacement by the user fast and easy. It is not
necessary to turn off the UPM or the connected system. The GTS Series
allows the battery to be “hot-swapped” while the system is running.
To Next Page
Loading...
