Need help?Do you have a question about the Powervar ABCEG401 and is the answer not in the manual?
Expresses gratitude for choosing POWERVAR and highlights product confidence.
Instructions on how to register the product purchase online for support and updates.
Explains the advanced features and protection capabilities of the GTS Series UPM.
Describes the true, low distortion sinewave output for compatibility with sensitive electronics.
Explains the circuit that monitors and adjusts input voltage to prevent erroneous inverter operations.
Describes circuitry enabling UPM startup from AC supply or internal battery.
Details smart communications options for data protection, monitoring, and analysis.
Explains the ease of battery replacement and expected lifespan of UPM batteries.
Emphasizes saving the manual and general warnings about batteries and hazardous voltages.
Details critical usage, environmental, and connection precautions to avoid risks and warranty voidance.
Warns of energy hazard from batteries and recommends removing conductive jewelry during replacement.
Addresses FCC compliance and provides measures to correct radio frequency interference.
Guides on checking for shipping damage and filing claims with the carrier.
Provides instructions and cautions for safely unpacking the UPM unit and its accessories.
Specifies ideal placement conditions and minimum ventilation clearance for the UPM.
Outlines the steps for connecting the power cord and turning on the UPM.
Explains battery LED behavior during charging and initial startup tests.
Recommends and describes how to perform periodic self-tests for continuous UPM operation.
Instruction to connect battery plug(s) before operating the UPM.
Describes the dual function of the On/Off button for powering up and shutting down the UPM.
Explains the dual function of the Test/Silence button for self-testing and alarm silencing.
Details LED displays for current load percentage and battery charge capacity.
Explains the four individual LEDs indicating system status like Power, Battery, and Fault.
Describes the rear panel indicator for improper AC receptacle wiring and its implications.
Details the port for smart communications, monitoring, and data logging.
Explains USB connectivity for OS recognition as an HID device without drivers.
Describes the RJ11 port for legacy UPS monitoring software using basic signal interface.
How to use native OS features for automatic safe shutdown via USB connection.
Outlines benefits like safe shutdown, configuration, diagnostics, and fleet management.
Provides URLs for information and help with MopUPS Express and ManageUPS CIO software.
Explains the RJ11 port's basic signal interface and pin functions for monitoring.
Details the signals and polarity for each RJ11 pin for communication.
Provides specific notes regarding RJ11 pin functionality, component ratings, and shutdown procedures.
Provides step-by-step instructions for starting the UPM using the Start Manager feature when AC power is unavailable.
Guidelines for storing the UPM for extended periods, including battery charging schedules.
States the product is not designed for continuous operation solely on battery power.
Discusses factors affecting battery lifespan and LED indicators for replacement needs.
Lists precautions for battery servicing, emphasizing supervision by qualified personnel.
Clarifies that only the battery assembly is user serviceable and how to access it.
Details hazards of short-circuited batteries, fire, toxicity, and proper handling.
Advises on battery disposal, return options, and ordering replacement batteries from POWERVAR.
Describes the process of changing batteries while the UPM is powered on.
Warns about explosion risk if the wrong battery type is used for replacement.
Lists compatible battery brands, types, and ratings for replacement.
Reiterates the energy hazard warning for 12V batteries during replacement, advising jewelry removal.
Warns against disposing batteries in fire or mutilating them due to explosion and toxicity risks.
Provides step-by-step instructions for removing and installing batteries in the UPM.
Illustrates the rear panel connectors for 250 VA models in North American and International versions.
Illustrates the rear panel connectors for 400 VA models in North American and International versions.
Illustrates the rear panel connectors for 600 VA models in North American and International versions.
Lists electrical specifications for North American models including VA, Watts, Frequency, Voltage, and Amps.
Lists electrical specifications for International models including VA, Watts, Frequency, Voltage, and Amps.
Details energy efficiency and output BTU/Hr for different VA ratings of the UPM.
Describes general electrical properties like waveform, transfer time, and input frequency range.
Provides unit dimensions and shipping weights for North American and International models.
Lists operating and storage conditions for temperature, humidity, and altitude for the UPM.
Details charging times and battery configurations for different VA rated UPMs.
Describes the UPM's performance regarding noise rejection and isolation per ANSI/IEEE C62.41 standards.
Specifies surge voltage withstand ratings according to ANSI/IEEE C62.41 and IEEE587-1980 standards.
Explains how the Voltage Manager boosts or bucks voltage based on input power conditions.
Lists safety agency approvals such as UL, cUL, and CE markings for the UPM.
Details compliance with Electromagnetic Compatibility standards like FCC Part 15 J Class A and EN standards.
Addresses problems related to the UPM not powering up and the absence of audible alarms.
Covers troubleshooting for illuminated overload LEDs and battery status indicators like Low/Replace Battery.
Addresses issues of unexpectedly short backup time and the computer not turning on after UPM activation.
Troubleshoots problems with MopUPS Express connectivity, interface cables, and computer configuration.
Lists essential checks to perform before starting troubleshooting, such as outlet integrity and voltage levels.
Details the five-year warranty for the product and the two-year warranty for the batteries.
Outlines conditions that can limit or void the warranty, such as misuse or unauthorized repair.
Provides addresses, phone numbers, and fax for USA and Canada technical support.
Provides addresses, phone numbers, and fax for Europe/Asia and Mexico technical support.
Directs users to the official website for additional product information and support resources.
To Next Page
General
