PowMr MPPT-60A User Manual

9
Technical Date
② PV Short Circuit
When PV short circuit occurs, the controller will stop charging. Remove it to start normal
operation
③ PV Reverse Polarity
Fully protection against PV reverse polarity, no damage to the controller. Correct the
connection to start normal operation.
④ Battery Over Voltage
If there are other energy sources to charge the battery, when the battery voltage exceeds
15. 5/31. 0/46. 5/62. 0V, The controller will stop charging to protect the battery from
overcharging damage. (Pay attention to the stop charging means charging current is very
low )
⑤ Battery Over Discharge
When battery voltage drops to the setting voltage point of low voltage disconnect, the
controller will stop discharging to protect the battery from over discharging damage.
⑥ Load Over Current protection
If the load current exceeds the maximum load current rating 1. 25 times, the controller will
disconnect the load.
⑦ Load Short Circuit Protection
Once the load short circuit happens, the Load Short circuit protection will start
automatically.
⑧ Over Temperature Protection
Models
MPPT-60A
Charging mode
3-stage: constant current(MPPT),
4-constant voltage, Floating
Max.PV Input Power
12V system
720W
24V system
1440W
36V system
2100W
48V system
2800W
Input specification DC
12V system DC
20V~80V
24V system DC
37V~105V
36V system DC
50V~160V

PowMr MPPT-60A Specifications

General

Rated Charge Current	60A
Battery Voltage	12V/24V/36V/48V Auto
Max. Efficiency	98%
MPPT Tracking Efficiency	99%
Operating Temperature	+55°C
Protection	Over Temperature
Communication	RS485