5)
Red wire connected positive Pole of controller and black wire connected positive Pole
of controller
6)
Contact us first if you have any questions.
◼ Liability Disclaimer
The manufacture shall not be liable for damages, especially on the battery, caused by
use other than as intended or as mentioned in this manual or if the recommendations of
the battery manufacturer are neglected. The manufacturer shall not be liable if there has
been service or repair carried out by any unauthorized person, unusual use, wrong
installation, or bad system design.
MPPT series solar charge controller is based on an advanced maximum power point
tracking (MPPT) technology developed, dedicated to the solar system ,the charge
controller conversion efficiency up to 97%.
It comes with a number of outstanding features, such as:
1.
MPPT 60A solar charge controller
2.
100% MPPT technology
3.
Built-in DSP controller with high performance
4.
Automatic switch for 12V/24V/36V/48V battery bank
5.
stage charging optimizes battery performance
6.
Overcharge protection, input PV polarity reverse protection .output limited current
protection ,over-temperature protection
7.
Trouble shooting promotion function
8.
Suitable for battery types such as sealed lead acid ,vented gel and lithium battery .
9.
Easy to be mounted
To Next Page
Loading...
Need help?
General
