Need help?Do you have a question about the PowMr POW-HVM4.2M-24V-N and is the answer not in the manual?
General| Model | POW-HVM4.2M-24V-N |
|---|---|
| Rated Power | 4200W |
| Input Voltage | 24V DC |
| Output Voltage | 230V AC |
| Output Frequency | 50Hz/60Hz |
| Max. Charging Current | 80A |
| Max. Efficiency | 93% |
| Output Waveform | Pure Sine Wave |
| Cooling Fan | Yes |
| Operating Temperature | -10°C to 50°C |
| Max. PV Array Open Circuit Voltage | 145V DC |
| Protection Features | Overload Protection, Short Circuit Protection, Over Temperature Protection |
| MPPT Voltage Range | 30V-115V |
Detailed steps and safety precautions for connecting the battery system.
Instructions for correctly connecting the AC power input and output terminals.
Steps and critical parameters for connecting solar photovoltaic (PV) modules.
Detailed instructions for configuring inverter settings through the LCD interface.
Details on the battery equalization process, its benefits, and how to apply it.
A list of fault codes, their causes, and associated icons for troubleshooting.
Information on warning indicators, audible alarms, and flashing icons for system status.
Technical parameters when the inverter operates in utility line mode.
Technical parameters when the inverter operates in battery inverter mode.
Technical parameters for utility and solar charging modes.
To Next Page
