Powtran PI160-0R7G1(Z) - Page 133

Appendix I
129
Appendix I
Analog output
DA1
control: (write only)
Command address
Command content
2002
0 to 7FFF indicates0％ to 100％
Analog output
DA2
control: (write only)
Command address
Command content
2003
0 to 7FFF indicates0％ to 100％
SPB high-speed pulse output control: (write only)
Command address
Command content
2004
0 to 7FFF indicates0％ to 100％
Inverter fault description:
Inverter fault address:
Inverter fault information:
8000
0000: No fault
0001: Inverter unit protection
0002: Acceleration overcurrent
0003: Deceleration overcurrent
0004: Constant speed overcurrent
0005: Acceleration overvoltage
0006: Deceleration overvoltage
0007: Constant speed overvoltage
0008: Control power failure
0009: Undervoltage fault
000A: Inverter overload
000B: Motor Overload
000C: Input phase loss
000D: Output phase loss
000E: Module overheating
000F: External fault
0010: Communication abnormal
0011: Contactor abnormal
0012: Current detection fault
0013: Motor parameter auto tunning fault
0015: Parameter read and write abnormal
0016: Inverter hardware fault
001A:Running time arrival
001B:Custom fault 1
001C: Custom fault 2
001D: Power-on time arrival
001E: Load drop
001F: PID feedback loss when running
0028: Fast current limiting timeout
002B: Motor overspeed
002D: Motor overtemperature
005C: Initial position error
Data on communication failure information description (Fault code):