PPA DZ 1500 - Miller Edge Photoeye Connection and Programming

18
13.5 - Miller Edge reexi Gard Connection
PREPARING PHOTOEYE
CUT
15V
GND
FOT
Reassemble the photoeye.
To align the photoeye assemble the hood on then reector.
Place the photocell directed at the reector and check the green light below the photocell lens (it will turn solid green when properly
aligned).
The red light at the top of the photocell will be o whenever the photocell is aligned and unobstructed, and is on whenever something
is between the photocell and the reector.
TRIFLEX PROGRAM (UL 325 2018)
To enable the second photocell:
Put the dipswitch # 8 in On position, press and release the "+" button, return the dipswitch to OFF position.
To disable the second photocell:
Put the dipswitch # 8 in On position, press and release the "-" button, return the dipswitch to OFF position.