PPG Semco 1088 - Table of Contents

12780 San Fernando Road, Sylmar, California 91342 | www.semcopackaging .com | Email: semcoinfo@PPG.com
|
1
Table of Contents
1 – Requirements & ratings ........................................................................................................................ 2
2 – Machine description .............................................................................................................................. 3
3 – Safety instructions ...................................................................................................................................... 4
4 – Safety features ........................................................................................................................................... 5
5 – Set-Up ......................................................................................................................................................... 5
6 – Lay-out ........................................................................................................................................................ 6
7 – Operation ................................................................................................................................................. 7-8
8 – Maintenance preparation ........................................................................................................................... 9
9 – Preventative maintenance ................................................................................................................... 10-13
10 – Calibration procedure ............................................................................................................................... 14
11 – Mixer setting adjustment ..................................................................................................................... 15-19
12 – Troubleshooting ................................................................................................................................... 20-24
13 – Spare parts .......................................................................................................................................... 25-27
14 – Appendix ................................................................................................................................................... 28
15 – Schematic .................................................................................................................................................. 29
Notice
This document is based on information available at the time of publication. While PPG, has made every effort to provide
current and accurate information, this manual will cover all contingencies regarding installation, startup, operation, and
maintenance based on data collected during factory acceptance testing and production simulation runs by PPG.
PPG assumes no responsibility for third-party or original equipment manufacturer (OEM) documentation used for this
publication or included as supplemental information that is to be used as an internally controlled document.
This publication may not be reproduced by any means or distributed, in whole or in part, without the express written
consent of PPG.