2
|
12780 San Fernando Road, Sylmar, California 91342 | www.semcopackaging.com | Email: semcoinfo@PPG.com
1. Requirements & ratings
1.1 PPG SEMCO
®
Model 1088 CE non-twist mixer is not to be used in explosive environments.
1.2 Compressed Air, no oil, moisture, or dust particles. Use the supplied air filter to prevent contamination.
1.3 Pressure min/max: 85 psi (5.9 bar) – 100 psi (6.6 bar). It is recommended that a regulator/filter be used
at the machine location to ensure clean, dry air is supplied.
1.4 Air rate required: Min. 3 CFM (80 l/min - 5 m³/h)
1.5 Length x width: 380 mm x 300 mm
1.6 Height min/max: 775/975 mm
1.7 Max. working stroke: 250 mm
1.8 Recommended motor speed: approx. 135 rpm (see Section 10)
1.9 Max. torque at driver: 29 Nm
1.10 Cartridge outer diameter: 43 mm
1.11 Recommended set-up height: normal workbench height
1.12 Weight: approx. (35 kg) – 75 lb.
To Next Page
Loading...
